J.L. Wingert Mixers (Light Duty & WXL Heavy Duty)
Built for durable, reliable continuous duty on tanks from 5 to 5,000 gallons, Wingert mixers are configurable with multiple mounts, motor selections and mixing elements—ideal for blending liquids, suspending solids or dissolving.
- LD (Light Duty) for small tanks and make-down; WXL (Heavy Duty) for large/viscous service
- Flexible mounts: bracket, clamp, flange, thread, and tank stand options (LD); bracket/clamp options (WXL)
- Motor choices: TEFC, explosion-proof, and air-operated (WXL); TEFC (LD)
Manufacturer We Represent
Featured Wingert Mixers
What Makes Wingert Mixers Different (and When to Choose LD vs WXL)
Model Families
- LD (Light Duty)—compact TEFC motors, multiple mounts (LDB, LDC, LDF, LDT, LDX) and mixing agents (PRP SS propeller, neoprene “A”, SS “H”).
- WXL (Heavy Duty)—broader HP range and motor types (TEFC, XP, Air) for demanding duty.
Horsepower & Motors
- WXL HP options: 1/3 to 5 HP (1/3, 1/2, 3/4, 1, 1-1/2, 2, 3, 5 HP).
- Motor types: TEFC (1-ph & 3-ph), Explosion-Proof (1-ph & 3-ph), and Air-Operated.
Quick Selection by Tank Size & Viscosity
How to size: Use the Wingert sizing guidance—e.g., a 50-gal tank at 100 cps needs about a 1/4 HP high-speed mixer; a 3,000-gal tank at 500 cps targets about a 1-1/2 HP 350 RPM WXL. Always verify against application specifics.
Note: application or intended use may change recommendations—consult factory guidance.
Materials & Performance
Mixing Elements & Options
- Stainless propellers (PRP) standard on LD; optional neoprene and SS impellers.
- Mounts: bracket, clamp, flange, thread, tank stand (LD).
- Coatings: epoxy coating available; note limits with abrasive/granular chemicals.
Operating Envelope
- Designed for continuous duty mixing in ~5–5000 gal tanks.
- Multiple motor enclosures available to match environment (TEFC/XP/Air).
Installation, Environment & Safety
Location & Environment
- Open motors indoors/low moisture; TEFC, air, XP motors may be installed in weather, but protect from rain/snow/heat/wind to prolong life.
- Check motor data label (duty cycle, ambient temp, insulation rating) before install.
Safety & Warranty Essentials
- Only qualified personnel should install/operate/maintain; read all safety precautions.
- Standard mixer warranty: 1 year from shipment against defects; motors/gear reducers follow OEM warranties.
- Air-powered mixers require lubricated air to validate warranty.
Send Your Tank Size & Viscosity—We’ll Size the Wingert Mixer
Share gallons, viscosity (cPs), temperature, specific gravity, solids %, and mounting preference. We’ll return the best LD or WXL build with motor/mount options and lead time.
Wingert Mixer FAQs
How do I size a Wingert mixer for my tank?
Use Wingert’s quick selection guidance: e.g., 50 gal at 100 cPs ≈ 1/4 HP high-speed; 3,000 gal at 500 cPs ≈ 1-1/2 HP 350 RPM WXL. Always validate against your application.
Which mounts are available?
LD offers bracket (LDB), clamp (LDC), flange (LDF), thread (LDT), and tank stand (LDX) mounts; WXL commonly uses bracket or clamp.
What motor types can I choose?
WXL supports TEFC (1-ph/3-ph), Explosion-Proof (1-ph/3-ph), and Air-Operated motors; LD models are TEFC.
Where should I install the mixer motor?
Open motors are for indoor/low-moisture areas; TEFC, air and XP motors can be installed outdoors, but protect from weather to extend life and review the motor data label for duty/ambient.
What’s covered under warranty?
Mixers are warranted against manufacturing defects for one year from shipment; motors/gear reducers follow their OEM warranties. Air-powered mixers must use lubricated air.